Over time, dirt, dust and grime will get ground into your carpet, creating unsightly stains and eat away at the fibers. Vacuuming your carpet on a regular basis can go a long way in maintaining the quality and cleanliness of your carpet, but once the dirt sticks to the carpet fibers, it’s time for more than just regular cleaning. Here are a few tips on how to get ground in dirt out of carpet:
How to Get Ground In Dirt Out of Carpet
Start by vacuuming the carpet to remove any loose dirt, paying particular attention to areas where people sit and move their feet.
Purchase a commercial carpet cleaner or spot remover from your local store. Alternatively, you can create your own homemade cleaning solution by mixing ¼ teaspoon for clear dish washing liquid for every cup of water.
Test the solution on a small inconspicuous area of the carpet to ensure it doesn’t damage or discolor the fabric.
Put a small amount of the cleaning solution on a clean, white piece of cloth and use it to work the solution into the fibers. You want to prevent the stain from spreading by working your way from the edges of the ground-in dirt towards the center. Keep the solution in the carpet for a couple of minutes, then blot it dry with a dry piece of white cloth. Repeat this step until the dirt is no longer transferring from the carpet to the white cloth.
Rinse the area with some lukewarm water and blot it dry with a dry cloth or towel. You want the area to be as dry as possible so try to remove as much of the moisture as you can. One way to do this is by placing one or more dry towels on the damp area and then weighing them down with a heavy object. Leave the object on the towel overnight to pull the remaining moisture.
Remove the towel and heavy object before vacuuming the area once more to remove any dried cleaning solution that may be stuck in the carpet fibers. If you allow the solution to remain, it may attract dirt and create a new stain.
If you’re dealing with a large area of ground in dirt, consider using an extractor. Otherwise referred to as a steam cleaner, an extractor relies on heat to loosen and pull out dirt from carpet fibers. The pressure and heat are regulated to avoid over-wetting the carpet. Some extractors provide extra cleaning power by injecting a cleaning solution into the carpet fibers and then immediately pulling it out.
Hire a professional carpet cleaner to get rid of any ground in dirt if you can’t do it yourself. Professional clears are well equipped with high powered machines and also knowledgeable on how to treat each type of ground in dirt. Moreover, hiring a professional to clean your carpet regularly will help to reduce allergens, improve your health and prolong the life of your carpet.
Through time, dust and grime will get trapped into your carpet and will eventually be ground into it as well. Although vacuuming on a routine basis will help alleviate the build up of the dirt, deep cleaning your carpet is imperative to maintain clean floors. This article went over how to get ground in dirt out of carpet by making your own homemade solution. Good luck!